BTSMR - 1104/0180, BELZONA 1111 SOLIDIFIER
- MSDS: BTSMR
- Manufacturer: BELZONA AMERICA INC
- Product Name: 1104/0180, BELZONA 1111 SOLIDIFIER
- National Stock Number: 8030-00-187-7747
Product Identification
Product ID:1104/0180, BELZONA 1111 SOLIDIFIER
MSDS Date:02/17/1992
FSC:8030
NIIN:00-187-7747
Kit Part:Y
MSDS Number: BTSMR
Responsible Party
MIAMI, FL 33172
US
Emergency Phone: 305-594-4994 OR 305-274-6512
Info Phone: 305-594-4994
Preparer: J. PARTINGTON
Cage: 0PX05
Contractor
Telephone: 305-594-4994
Cage: 0PX05
Ingredients
(ORAL) 1080 MG/KG
CAS: 111-40-0
RTECS: IE1225000
Fraction By Weight: 10-30%
OSHA PEL 1 PPM, S
ACGIH TLV: 1 PPM, S
TALC POWDER, (CONTAINING NO ASBESTOS FIBERS); (TALC)
CAS: 14807-96-6
RTECS: WW2700000
Fraction By Weight: 40-70%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 1-5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
(ORAL) 414 MG/KG
CAS: 108-95-2
RTECS: SJ3327000
Fraction By Weight: 1-5%
OSHA PEL 5 PPM, S
ACGIH TLV: 5 PPM, S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PHENOL, 2,4,6-TRIS(DIMETHYLAMINOMETHYL);
CAS: 90-72-2
RTECS: SN3500000
Fraction By Weight: 1-5%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CORROSIVE. ACUTE: CAUSES BURNS TO SKIN
& EYES. CHRONIC: CHEMICAL BURNS & SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:CORROSIVE.
Medical Cond Aggravated by Exposure:SKIN & EYE CONDITIONS.
First Aid
First Aid:INHALE-REMOVE SOURCE OF CONTAMINATION &/OR MOVE VICTIM TO
FRESH AIR. IF RECOVERY IS DELAYED, OBTAIN MEDICAL ATTENTION.
EYE-FLUSH W/WATER FOR AT LEAST 15 MINS. IMMEDIATE FIRST AID IS
NEEDED TO PREVENT EYE DAMAGE. SEEK PHYSICIAN. SKIN-IMMEDIATELY
REMOVE EXCESS WITH A CLEAN CLOTH & WASH W/SOAP & WATER. SEE
PHYSICIAN. INGEST-DO NOT INDUCE VOMITING. RINSE MOUTH WITH WATER &
DRINK 1 CUP WATER. SEE DOC.
Fire Fighting
Flash Point Method:SCC
Flash Point:208F,98C
Extinguishing Media:WATER FOG (NOT A DIRECT STREAM OF WATER), FOAM,
CARBON DIOXIDE & DRY CHEMICAL.
Fire Fighting Procedures:WEAR PROTECTIVE CLOTHING & USE SELF-CONTAINED
BREATHING APPARATUS. FULL BUNKER GEAR SHOULD BE WORN IN EXTREME
CASES. USE SAND TO CONTAIN BURNING MATERIAL.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE HAZARDOUS.
Accidental Release
Spill Release Procedures:ABSORB W/AN INERT MATERIAL (E.G. EARTH/SAND) .
SWEEP UP, PLACE INTO SUITABLE LABELLED CONTAINERS, SEAL & DISPOSE
OF PROPERLY. FLUSH AREA W/DETERGENT & WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CONTAINERS SHOULD BE STORED UNDER
COOL, DRY CONDITIONS. OVERHEATING MAY CAUSE CONTRS TO RUPTURE.
EMPTY CONTRS WILL RETAIN RESIDUE & MAY BE DANGEROUS.
Other Precautions:CHECK ALL CONTAINERS FOR LEAKS AT REGULAR INTERVALS &
BEFORE USE. AVOID BREATHING VAPORS & CONTACT W/SKIN & EYES.
Exposure Controls
Respiratory Protection:IN CONFINED AREAS OR WHERE GOOD NATURAL/MECH
VENT IS NOT AVAIL, LEADING TO RISK OF EXCEEDING TLV'S INDICATED, OR
WHERE MACHINING/ABRADING OF CURED MATL LEADS TO PRODUCTION OF
RESPIRABLE &/OR NUISANCE DUST, AN APPROVED RESPIRATOR WORN.
Ventilation:WHERE ADEQUATE NATURAL VENTILATION IS NOT AVAILABLE PROVIDE
SUITABLE LOCAL EXHAUST VENTILATION.
Protective Gloves:IMPERMEABLE GLOVES (NEOPRENE OR PVC).
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:WHERE THERE IS RISK OF CONTAM OF FOOTWEAR,
SFTY BOOTS SHOULD BE WORN & CLEANED THORO BEFORE REUSE.
Work Hygienic Practices:WHEN USING, DO NOT EAT, DRINK OR SMOKE. REMOVE
CONTAMD CLTHG & LAUNDER BEFORE REUSE. WASH HANDS W/SOAP & WATER.
Supplemental Safety and Health
NONE.
Chemical Properties
Boiling Pt:B.P. Text:>347F,>175C
Vapor Pres:0.22 @ 25C
Vapor Density:>AIR
Spec Gravity:1.66
Solubility in Water:SLIGHT (0.1-1.0%)
Appearance and Odor:LIGHT GRAY PASTE W/AMMONICAL ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, EPOXY RESIN & ISOCYANATES.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:GASEOUS COMBINATION OF CARBON,
HYDROGEN, NITROGEN & OXYGEN MAY OCCUR AT ELEVATED TEMPERATURE.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.